分光光度法测定三氧化铀中的硫酸根

采用TBP-萃淋树脂吸附三氧化铀样品中的铀,硫酸根与铬酸钡进行交换反应后,直接比色法测定硫酸根的含量。实验中研究了三氧化铀样品中硫酸根含量测定的样品制备、分离、反应酸度,煮沸时间,铬酸钡用量等影响因素。优化条件下,采用硝酸(5mol/L)淋洗、1mL HCl溶液(2.5mol/L)调节溶液中酸浓度、使用2mL BaCrO_4进行交换反应、煮沸3min,得到方法相对标准偏差小于10%,加标回收率为92.9%～110%。实验结果表明,直接显色的测定方法灵敏、快速、准确度高。方法测定条件易于获得,适于推广应用。     

The effect of controlled ion bombardment on the electronic structure of the Si(0 0 1) surface

We have studied the effects of controlled ion bombardment on the electronic structure of the Si(0 0 1) surface. The surface was exposed to various doses of Ar⁺ ions accelerated towards the surface at 500 eV. X-ray photoelectron spectroscopy (XPS) spectra of the irradiated H-terminated Si(0 0 1) surface reveal the appearance of peaks that are associated with the presence of cleaved Si bonds. Ultraviolet photoelectron spectroscopy (UPS) spectra of the irradiated Si(0 0 1)2 × 1 surface show that the dimer dangling-bond surface state decays monotonically with increasing dose. These results, coupled with previous scanning tunneling microscopy (STM) studies, indicate that the breaking of dimers, and possibly the creation of adatom-like defects, during ion irradiation are responsible for the changes in the electronic structure of the valence band for this surface.     

Effect of Ca interlayer thickness on electron injection of lithium quinolate/Ca/Al cathodes

Electron injection behavior of lithium quinolate (Liq)/Ca/Al cathode was investigated by using X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy (UPS). Interfacial energy barrier lowering of Liq/Ca/Al cathode was dependent on Ca thickness and maximum energy level shift was observed at a Ca thickness of 1 nm. Maximum current density could be obtained in Liq/Ca/Al device at a Ca thickness of 1 nm and it was well correlated with energy level shift from UPS measurement. Power efficiency of Liq/Al device could be improved by more than 70% by inserting Ca layer between Liq and Al.     

纳米银胶的光化学制备及其特性研究

采用紫外光化学法制备了黄色银胶,并研究了硝酸银和柠檬酸三钠的浓度对制备的银胶吸收光谱的影响,发现随着硝酸银浓度的增加银胶的吸收峰先兰移然后红移;当柠檬酸三钠的浓度增加时,硝酸银吸收峰的位置几乎不变,而吸收峰强度增大.最后通过透射电镜成像研究其尺寸,发现其尺寸分布在5~20 nm之间.     

N,N'-二-[3-羟基-4-(2-苯并噻唑)苯基]脲的光谱实验与密度泛函理论研究

利用实验观测与密度泛函理论(DFT)计算方法考察了新化合物N, N'-二-[3-羟基-4-(2-苯并噻唑)苯基]脲(4-DHBTU)的红外、核磁与紫外吸收光谱性质.与单体2-(4-氨基-2-羟苯基)苯并噻唑(4-AHBT)相比, 4-DHBTU的实验紫外吸收强度显著增强,最大吸收峰发生了明显红移,并呈现出双吸收峰特征.结合实验光谱数据与密度泛函理论计算分析表明, 4-DHBTU分子最稳定的基态异构体为cis-C₁₁和trans-C₁₁,而导致上述紫外光谱差异的主要原因是4-DHBTU样品中cis-C₁₁, trans-C₁₁, cis-C₂₂, trans-C₂₂等多种异构体共存.此外, 4-DHBTU与溶剂二甲基亚砜(DMSO)间氢键作用使得核磁实验中4-DHBTU的15H、16H氢谱化学位移显著增大.     

Ni在ZrO2(111)薄膜表面的生长、电子结构及热稳定性

利用X射线光电子能谱、紫外光电子能谱和低能电子衍射研究了Ni纳米颗粒在ZrO₂(111)薄膜表面的生长模式、电子结构及热稳定性. ZrO₂(111)薄膜外延生长于Pt(111)单晶表面,厚度约为3 nm.结果表明,当Ni气相沉积到ZrO₂(111)薄膜表面上时,遵循Stranski-Krastanov生长模式,即先二维生长至0.5 ML(monolayer),然后呈三维岛状生长.随着覆盖度的减小, Ni 2p_3/2峰逐渐向高结合能位移.利用俄歇参数法分析发现,引起该峰向高结合能位移的主要原因来源于终态效应的贡献,但在低的Ni覆盖度时,也有部分初态效应的贡献,说明Ni在ZrO₂表面初始生长时,两者存在较强的界面相互作用, Ni向ZrO₂衬底传递电荷,形成带部分正电荷的Ni_δ+.两种不同覆盖度(0.05和0.5 ML)的Ni/ZrO₂(111)模型催化剂热稳定性研究表明,当温度升高时, Ni逐渐被氧化成Ni₂₊,并伴随着向ZrO₂衬底的扩散.本文从原子水平上认识了Ni与ZrO₂表面的相互作用和界面结构,为理解实际ZrO₂担载的Ni催化剂结构提供了重要的依据.     

紫外可见光谱的水产养殖水体有机物浓度快速检测研究

应用紫外可见（ultraviolet/visible,UV/Vis）光谱技术对表征水产养殖水体中有机物浓度的指标化学需氧量（chemical oxygen demand,COD）进行快速测量,对采集到的135份甲鱼养殖水样进行UV/Vis波段全光谱扫描,采用无信息变量消除（uninformative variable elimination,UVE）和连续投影算法（successive projections algorithm,SPA）相结合的变量选择算法选取全波段光谱中的特征波长,从201个UV/Vis光谱变量中选取了7个特征波长,只占全波段光谱变量的3.48%,降低了建模的时间和模型的复杂度。结合最小二乘支持向量机（least-square support vector machine,LS-SVM）算法进行COD预测建模,结果表明：使用特征波长建模的预测效果（相关系数r（correlation coefficient）=0.89,预测均方根误差（root mean square error of prediction,RMSEP）=15.46 mg·L-1）好于使用全波段光谱建模的预测效果（r=0.88,RMSEP = 15.71 mg·L-1）。使用UVE-SPA变量选择算法获取UV/Vis光谱特征波长,结合LS-SVM建模,可以快速、准确的测量水产养殖水体中的COD浓度,为进一步实现水产养殖水质的在线检测以及其他水质参数的快速测定奠定了基础。     

宽波段高分辨率小型紫外成像光谱仪光学系统研究

结合小型紫外光谱仪器设计原理对紫外成像光谱仪进行了研究。以离轴抛物镜为望远镜,超环面光栅为成像光谱系统设计了系统方案;该光学系统的优化设计就是对超环面光栅的参数设计。分析了光栅的光程函数和像差方程,总结了单超环面光栅结构的完善聚焦条件和完善成像条件;这两种条件无法在代数计算下得到完善代数解,限制了光谱仪的工作波段和视场,引入遗传算法解决了这个问题。以一工作波段为200~280 nm的日盲紫外成像光谱仪为例对设计理论进行验证,根据优化理论计算了初始结构最优解并进行光线追迹模拟,成功得到了F数为5.7,焦距为102 mm,全视场全波段调制传递函数值在奈奎斯特频率(20 lp·mm-1)下大于0.65的高分辨率成像光谱仪光学系统。设计结果表明这种光学系统设计理论适用于小型宽波段高分辨率紫外成像光谱仪。     

Analysis of Peanut Oil Adulterated with Other Edible Oils by Spectrophotometry

Since peanut oil(PO) is more expensive than other seed oils, some PO is adulterated with other cheap seed oils, such as soybean oil, palm olein, cottonseed oil, corn oil and rapeseed oil. The conventional method for determining whether PO was adulterated is to detect the freezing point of oils. The proposed method for the determination of adulterants in PO was based on monitoring the change of absorbance when the sample was refrigerated. A special spectrophotometer was developed. A total of 10 kinds of POs from different suppliers were chosen and adulterated with other seed oils at the volume fraction levels ranging from 5% to 30%. A total of 150 samples were analyzed by the proposed method and the results were satisfactory.     

Promising Ultraviolet Absorbers—Novel Guanine Analogs Having Significantly Improved Ultraviolet Absorption Capacity and Dissipating the Energy of Absorbed Photons by Nonradiative Decay Mechanism

Structural properties of nucleobase underlie their ultrafast excited-state dynamics and low fluorescence quantum yields, which cause effectively nonradiative decay process and render them like sunscreens. Thus, eight guanine analogs[N-2-(2'-nitrobenzoyl)-guanine, N-2-(3'-nitrobenzoyl)-guanine, N-2-(4'-nitrobenzoyl)-guanine, N-2-(2'-hydroxybenzoyl)-guanine, N-2-(4'-methoxylbenzoyl)-guanine, N-2-(4'-chloricbenzoyl)-guanine, N-2-(4'- methylicbenzoyl)- guanine and N-2-(3',5'-dinitrobenzoyl)-guanine] with different substituted benzoyls, except N-2-(4'-chloricbenzoyl)-guanine, were newly synthesized. In contrast with guanine, they exhibit wider ultraviolet absorbent range, higher molar extinction coefficient and lower fluorescence intensity.